A Guide To Vehicle Safety Questions For The Practical Driving Test For Urdu Speakers

I don't believe I've seen you here before. You may want to subscribe to my feed to keep informed of new posts at DynamicVB.NetRSS feed. Thanks for stopping by!

 

QUESTION- Show me how you would verify that the direction indicators are correctlyfunctioning.

ANSWER- Applying the indicators or hazard warning button and examine working of all indicators. (may do turn ignition on, prompt not to start off engine)

 

Question- Inform me how you would verify that the brakes are working ahead of beginning a journey.

ANSWER- Brakes should not feel spongy or slack. Brakes ought to be examined as you set off. Automobile should not drag to one side.

 

QUESTION- Determine where the windscreen washer reservoir is and inform me how you would check the windscreen washer level.

ANSWER- Establish reservoir and clarify how to check level.

 

QUESTION- Show me how you would verify that the brake lights are functioning on this car. (I can assist you, if you want switch the ignition on, please don’t begin the engine)

ANSWER- Operate brake pedal, utilize reflections in windows, storage doorways, and so on, or ask someone to help. (may need to switch ignition on, advise not to start engine)

 

QUESTION- Show me / clarify how you would check that the power assisted steering is workingjust before starting a journey.

ANSWER- If the steering turns out hefty the mechanism may not be working properly. Earlier than starting a journey two basic exams can be made. Mild pressure on the steering wheelcircle, maintained while the engine is began, could result in a slight but obvious movement as the mechanism starts to operate. Alternatively turning the steering whee just after moving off will offer an fast sign that the power assistance is operating.

 

QUESTION- Inform me in which you would find the information for the advised tyre pressures for this car and how tyre pressures ought to be checked.

ANSWER- Producer’s guide, use a dependable pressure gauge, check and modify pressures when tyres are cold, don’t mostly they forget spare tyre, remember to refit valve caps.

 

QUESTION- Show me how you would verify the parking brake (handbrake) for extreme wear, make sure you hold secure control of the car

ANSWER- Utilize footbrake firmly. Show by applying parking brake (handbrake) so that once it is completely applied it secures itself, and is not at the end of the working travel.

 

QUESTION- Establish where the windscreen washer reservoir is and tell me how you would check the windscreen washer stage. Identify reservoir and explain how to verify degree.

ANSWER – Open up the bonnet, establish in which you would examine the engine oil level and tell me how you would check that the engine has enough oil. Determine dipstick / oil degree indicator, explain check of oil degree against the minimum/optimum markers.

 

QUESTION- Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures ought to be checked.

ANSWER- Producer’s guide, use a reliable pressure gauge, verify and adjust pressures when tyres are cold, don’t forget free tyre, remember to refit valve caps.

 

QUESTION- Open up the bonnet, identify exactly where you would examine the engine coolant degree and inform me how you would check that the engine has the correct degree.

ANSWER- Establish high/low level markings on header container the place fitted or radiator filler cap, and explain how to top till correct level.

 

QUESTION- Inform me how you ensure your head restraint is appropriately adjusted so it provides the very best safety in the event of a crash

ANSWER- The head restraint ought to be adjusted so the rigid component of the head restraint is at minimum as level as the eye or top of the ears, and as close to the back of the head as is comfortable. N.B. Some restraints might not be adjustable

 

QUESTION- Open up the bonnet, identify wherever the brake fluid reservoir is and inform me how you would check that you have a safe level of hydraulic brake fluid.

ANSWER-identify reservoir, verify stage against excessive/low markings.

 

Question- Tell me how you would verify the tyres to guarantee that they possess sufficient tread depth and that their common condition is legal to use on the roads.

Response – No cuts and bulges, 1.6mm of tread depth across the central ¾ of the breadth of the tyre and around the whole outer circumference.

 

QUESTION- Show me how you would verify that the horn is working (off roads only).

ANSWER – Check is made by employing control turn on ignition if required).

 

QUESTION- Inform me how you would examine the tyres to make certain that they have sufficient tread depth and that their common condition is safe to use on the roads.

ANSWER- No cuts and bulges, 1.6mm of tread depth throughout  the centrall ¾ of the breadth of the tyre and around the entire outer circumference.

 

QUESTION- Inform me how you would verify that the brakes are

working prior to beginning a voyage.

ANSWER -Brakes should not really feel spongy or slack. Brakes ought to be examined as you set off. Car should not drag to one side.

 

QUESTION- Display to me how you would clean the windscreen utilizing the windscreen washer and wipers

ANSWER- Work control to wash and wipe windscreen (turn ignition on if essential)

 

QUESTION- Inform me how you would verify that the headlights & tail lights are functioning. (No want exit car)

ANSWER- Clarification: Function button (turn on ignition if vital), after that stroll round vehicle. (As this is a “Tell Me” question, there is no want physically examine the lgts.)

 

QUESTION- Display to me how you would set the demister controls to crystal clear all the windows effectively, this should include each forward and rear screens

ANSWER -Set all related controls which includes; fan, temperature, air direction / supply and heated display screen to clear windscreen and windows. Engine does not need to be started for this demonstration

 

Query -Show me how you would switch on the rear fog lights and clarify when you would use it/them. (No do exit automobile)

ANSWER -Operate button turn on dipped headlights and ignition if necessary). Check warning light is on. Describe use.

 

QUESTION- Tell me how you would know if there was a difficulty with your anti lck braking system A.B.S

ANSWER- Warning light should illuminate if there is a fault with the anti lock braking system

 

Question- Display to me how you would examine that the brake lights are functioning on this car. (I can help you, if you want switch the ignition on, please don’t start the engine)

ANSWER – Work brake pedal, bring into play reflections in windows, storage doorways, etc, or ask another person to help. (may do turn ignition on, prompt not to start off engine)

 

QUESTION- Inform me how you would check that the headlights & tail lgts are functioning. (No do exit car)

ANSWER – Explanation: Run button turn on ignition if necessary), after that stroll round car. (As this is a “Inform Me” question, there is no do physically verify the lgts.)

 

QUESTION -Show me how you swap your headlight from dipped to major beam and explain how you would know the major beam is on whilst within the car

ANSWER- Function button (with ignition or engine on if necessary), verify with main beam forewarning light on dashboard

 

QUESTION- Tell me how you would understand if there was a issue with your anti lck braking system

ANSWER- Forewarning light should illuminate if there is a fault with the anti lock braking system

 

More Information About This Topic As Well A Wide Range Of Urdu Translated Study Material Is Available From Our Websitewww.Successfuldriver.com

This includes the best selling titles;

Driving Theory Test Urdu Translation Interactive ALL 3 Tests In One Product

Hazard Perception Test Urdu Translation

Highway Code Urdu Translation

Driving Practical Test Video Tutorials Including All Show Me, Tell Me Videos In Full Urdu Audio / Video Voice Over

 

 

More

Speak Your Mind

*